For your 2012 Navion on the 2011 Mercedes-Benz Sprinter 3500 chassis you will need the WeatherTech Front Auto Floor Mat in Black # WT4410631 or Gray # WT4610631. view full answer...
For your 26-foot Itasca Navion 24G Class-C motorhome we recommend the ADCO # AD54ZR Olefin cover. Olefin HD Class C RV cover works best for long-term storage in all climates. Heavy-duty fabric protects against rain, dirt, wind, and sun. Contoured fit matches shape of your RV. Secures with cinch rope and straps This will work just fine with your cabover option.
I also recommend providing similar protection to your Navion's tires by adding tire covers that block harmful UV rays that can... view full answer...
For your 2009 Itasca Navion Motorhome 24H I suggest the Adco Olefin HD All-Climate + Wind RV Cover for Class C Motorhome # AD54ZR. This cover is designed for Class C motorhomes up to 26' in length. Feedback from customers has shown this to be a good fit for the Itasca Navion & Winnebago View. This cover is intended for long-term storage in all climates and made from heavy-duty fabric that protects against rain, dirt, wind, and sun. The top panel is constructed of Olefin HD fabric that blocks... view full answer...
The 7-way on your motorhome already has the turn signals and brake lights combines on the same circuit like what your tow dolly is wire for as well so there would be no need for any type of adapter and you'd be able to connect directly and be good. view full answer...
Since your Itasca Navion Motorhome24M is a Class C shape and 25 foot long I recommend the Classic Accessories # 052963793635 cover. It features;
Zippered panels allow complete access to the front, entrance side and rear.
Elasticized bottom corners for fast and easy fitting.
Triple layer PolyPro III fabric top resists and repels rain and snow yet vents inside water vapor out.
I have left a link below to all covers that fit Class-C 25-footers. view full answer...
When it comes to installing wall clips in your 2013 Itasca Navion Motorhome the difference between the thin or thick wall clips is how thick the walls are in your motorhome.
The Refrigerator Vent Latches - Thin Wall - Qty 2 # 372235 work with walls up to 1/16 inches thick.
The Refrigerator Vent Latches - Thick Wall - Qty 2 # 372245 work with walls up to 3/16 inches thick.
I attached a review video link below. view full answer...
In a Class C motorhome addressing body roll/sway is a common issue. Suspension on the cutaway van chassis that most Class C's are built on is adequate with a van body on the chassis. However, when coach builders place a significantly different body on the chassis that obviously changes the dynamics and many OEM coach builders fail to upgrade/enhance those now less effective suspension components. We have two options available the Roadmaster Rear Anti-Sway Bar, # RM-1209-120 is a significant... view full answer...
I spoke with Lippert and based on the numbers you provided the Replacement Gear Motor Assembly for Lippert Slide-Out # LC368446 would be the correct replacement motor. I was not able to get dimensional drawings for this specific motor for you to reference. If you haven't installed a slide out motor before then I recommend checking out the video I've attached below to help guide you through the process. view full answer...
We do have a direct replacement for your Coleman Mach 8 air conditioner that comes with an adapter that plugs right into your existing wiring. Yours is a 15,000 Btu unit and you can replace it with a Furrion AC, in either White or Black:
- White: Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup # FR42PV
- Black: Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup # FR32PV
The only thing this doesn't come with is a heat strip, so if you'd like that as well... view full answer...
Sounds like what you are in need of is a 4-way round to 4-way flat adapter like part # ADP001. I looked up the Towmate wireless tow lights since we don't carry them and it looks like you can order it with a 4-way round like what you mentioned. view full answer...
I recommend using the Adco Ultra Tyre Gard RV Tire Covers # 290-3970 to protect the 245/75-22.5" spare tire on your motorhome. This is designed to be used as a storage cover but the strap at the bottom of the cover will ensure it stays in place on your spare tire while you drive. I cannot find anyone who manufactures a spare tire designed cover for anything over a 35" tire. view full answer...
Go To Results